- Ergonomic Palm-Push Tap Buttons
- Dedicated Water Bottle Refill Tap
- Original Design Since 2014
Palm Push Tap >
- Pedal Operated Drinking Tap
- Dedicated Water bottle Refill Tap
- NEW 2020 Model
Hands Free Tap >
.
Overview - Universal 2 aquaBUBBLER
With two wheelchair-accessible side pods and a total of four drinking and refill taps, the Universal 2 aquaBUBBLER is an all-abilities hydration hub.
Like all aquaBUBBLERs, the Universal 2 has ergonomic drinking and bottle refill taps, smooth body contours, and is made of durable & high quality materials. It is manufactured and assembled entirely in Australia and is available in a variety of heights and colours.
Features: 3 Drinking Taps, 1 Water Bottle Refill Tap
Principal Materials: Polypropylene (body), Stainless Steel (taps, drainage dish)
Heights (mm): 670 (Preschool), 770 (Kids), 870 (Junior/Seniors), 1020 (Seniors/Adults)
Colours: up to 4 per unit View Colour Choice Chart
Tap Operation: Palm Push (original design) or Hands Free (NEW!)
> Large push button
> Ergonomic action
> Easy to operate (18N to initiate flow, 15.5N to maintain flow)
> PEDAL initiated
> Mechanically operated – no power required
> Retrofit available for your existing aquaBUBBLERs
Colour Range
Vibrant and bold, neutral and restrained… or somewhere in between:
add contrast colours for the front, side, and refill pods for effect – or make your statement by going monochrome.
aquaBUBBLERs in school colours look smart and promote your school’s identity, while novel combinations can either tie in with your colour scheme or add accent.
Our body material is densely pigmented, conferring a rich surface appearance not achievable with a surface coating. Colour is locked into the structure — never to fade or to be scratched away!
Branding & Signage
Our graphics are fully integrated into the body material, sit flush with the surface, and cannot be scratched off.
External Chillers
Our chillers, like our drinking fountains, are Australian-made and offer advanced design benefits:
Our chillers are external to the drinking fountain. An external chiller allows for better ventilation, which results in less condensation and virtually eliminates breakdowns.
Four or more drinking fountains can be serviced by our largest chiller, timers can be plugged in so water is chilled only when required, and ambient temperature control means that if the air temperature drops, the chiller automatically adjusts to use the minimum energy required to chill the water.
External Chiller Options
TLS 16 under bench water chiller
This is a very powerful compact water cooler that will supply 16 litres of cold water per hour. It has a 3 litre stainless steel water storage tank, designed so that the tank can be backwashed to remove any sediment build up that may have entered the storage tank. Designed with rounded edges to prevent restriction of air flow in condenser if in a confined space. The nuts, bolts and screws are stainless steel with stainless steel side panelling. Can be connected to mains water supply or a low pressure filtration system. The water connection is 1/4″ BSP inlet and outlet, recessed below top and bottom of water cooler to protect water fittings.
RWC 15 & 7.5 water chiller
Water Chiller for 2 or more aquaBUBBLERS. These refrigerated water coolers RWC have either a 7.5 litre or 15 litre stainless steel storage tank. Both RWC’s supply 90 litres of cold water per hour. Each unit is with an ambient temperature control to prevent the refrigeration system from running in cooler weather (24 degrees or below). If the ambient temperature drops below 24 degrees, the RWC switches off. If the temperature raises above 24 degrees, the RWC powers up.
DDA Compliance
The Universal 2 aquaBUBBLER is compliant with the Disability Discrimination Act (1992) including:
- Circulation Space in front of the fixture in compliance with AS 1428.1 2009 which allows access from either side and enables a ‘parallel and front approach’.
- Large (40mm diameter) self-closing push button (operable by one hand) in line with AS 1428.1. 2009.
- The self-closing push button that is easily accessed (within 300mm of the front of the unit) enabling different approaches to the unit in line with AS 1428.1 2009.
- A design that enables operation by persons with a preference for either left or right hand.
- A force to operate (19.5N to activate flow and 15.5 to 17 N to maintain flow) in line with AS 1428.2.
Spec Text
The Spec Text panel below is for replication into specification schedules.
Model Name: Universal 2 aquaBUBBLER
Model Code: AB2UA14
Tap Operation (Palm Push/Hands Free): TBC
Unit Location (Indoor, Outdoor): TBC
Unit Height in mm (670, 770, 870, 1020): TBC
Side Pod (L) Height: TBC
Side Pod (R) Height: TBC
Body Colour: TBC
Front Pod Colour: TBC
Side Pod (L) Colour: TBC
Side Pod (R) Colour: TBC
Additional Features
Garden Security Tap: TBC
Filter: TBC
Water Meter: TBC
Anti-Freeze Valve: TBC
Inmould Graphic: TBC
External Chiller: TBC
Shared External Chiller: TBC
Dog Bowl: TBC
Available in a variety of heights to cater for different age groups
(670mm, 770mm, 870mm, 1020mm).
Downloads
TECHNICAL DATA SHEET – SCHEMATIC
Branding & Signage Specifications >
PCF (Product Confirmation Form) >
For Revit File Please Contact Us >
External Chiller Downloads
- TLS16 Water Chiller
- TLS16 Water Chiller Connection Spec Sheet
- RWC15 Water Chiller
- RWC15 Water Chiller Connection Spec Sheet
