Incorporating all of the essential aquaBUBBLER design features and principles, our original model has ergonomic drinking and bottle refill taps, smooth body contours, and is made of durable & high quality materials. All aquaBUBBLERs are manufactured and assembled entirely in Australia and are available in a variety of heights and colours.
Features: 1 Drinking Tap, 1 Water Bottle Refill Tap
Principal Materials: Polypropylene (body), Stainless Steel (taps, drainage dish)
Heights (mm): 670 (Preschool), 770 (Kids), 870 (Junior/Seniors), 1020 (Seniors/Adults)
Colours: 12 available; up to 2 per unit View Colour Choice Chart
Tap Operation: Palm Push (original design) or Hands Free (NEW!)
> Large push button
> Ergonomic action
> Easy to operate (18N to initiate flow, 15.5N to maintain flow)
> PEDAL initiated
> Mechanically operated – no power required
> Retrofit available for your existing aquaBUBBLERs
Vibrant & bold, neutral & restrained… or somewhere in between: choose from our 12 colours to suit your setting.
Go monochrome or add a contrast colour for the refill pod.
aquaBUBBLERs in school colours look smart and promote your school’s identity. Novel combinations can tie in with your colour scheme – or add accent.
Our body material is densely pigmented, conferring a rich surface appearance not achievable with a surface coating. Colour is locked into the structure — never to fade or to be scratched away!
Our graphics are fully integrated into the body material, sit flush with the surface, and cannot be scratched off.
Our chillers, like our drinking fountains, are Australian-made and offer advanced design benefits:
Our chillers are external to the drinking fountain. An external chiller allows for better ventilation, which results in less condensation and virtually eliminates breakdowns.
Four or more drinking fountains can be serviced by our largest chiller, timers can be plugged in so water is chilled only when required, and ambient temperature control means that if the air temperature drops, the chiller automatically adjusts to use the minimum energy required to chill the water.
This is a very powerful compact water cooler that will supply 16 litres of cold water per hour. It has a 3 litre stainless steel water storage tank, designed so that the tank can be backwashed to remove any sediment build up that may have entered the storage tank. Designed with rounded edges to prevent restriction of air flow in condenser if in a confined space. The nuts, bolts and screws are stainless steel with stainless steel side panelling. Can be connected to mains water supply or a low pressure filtration system. The water connection is 1/4″ BSP inlet and outlet, recessed below top and bottom of water cooler to protect water fittings.
Water Chiller for 2 or more aquaBUBBLERS. These refrigerated water coolers RWC have either a 7.5 litre or 15 litre stainless steel storage tank. Both RWC’s supply 90 litres of cold water per hour. Each unit is with an ambient temperature control to prevent the refrigeration system from running in cooler weather (24 degrees or below). If the ambient temperature drops below 24 degrees, the RWC switches off. If the temperature raises above 24 degrees, the RWC powers up.
The Spec Text panel below is for replication into specification schedules.
Model Name: Classic aquaBUBBLER
Model Code: AB12
Tap Operation (Palm Push/Hands Free): TBC
Unit Location (Indoor, Outdoor): TBC
Unit Height in mm (670, 770, 870, 1020): TBC
Body Colour: TBC
Front Pod Colour: TBC
Water Outlet Guard Colour: TBC
Garden Security Tap: TBC
Water Meter: TBC
Anti-Freeze Valve: TBC
Inmould Graphic: TBC
External Chiller: TBC
Shared External Chiller: TBC
Dog Bowl: TBC
Available in a variety of heights to cater for different age groups
(670mm, 770mm, 870mm, 1020mm).