Our External chillers, like our drinking fountains, are Australian-made and offer advanced design benefits:
Our chillers are external to the drinking fountain. An external chiller allows for better ventilation, which results in less condensation and virtually eliminates breakdowns.
Four or more drinking fountains can be serviced by our largest chiller, timers can be plugged in so water is chilled only when required, and ambient temperature control means that if the air temperature drops, the chiller automatically adjusts to use the minimum energy required to chill the water.
TLS 16 Water Chiller
This is a compact water cooler that will supply 16 litres of cold water per hour. It has a 3 litre stainless steel water storage tank, designed so that the tank can be backwashed to remove any sediment build up that may have entered the storage tank.
Designed with rounded edges to prevent restriction of air flow in condenser if in a confined space. The nuts, bolts and screws are stainless steel with stainless steel side panelling.
Can be connected to mains water supply or a low pressure filtration system. The water connection is 1/4″ BSP inlet and outlet, recessed below top and bottom of water cooler to protect water fittings.
RWC 7.5 & 15 Water Chiller
Water Chiller for one or more aquaBUBBLERS. These refrigerated water coolers RWC have either a 7.5 litre or 15 litre stainless steel storage tank. RWCs supply 72-76 litres of cold water per hour. Each unit is with an ambient temperature control to prevent the refrigeration system from running in cooler weather (24 degrees or below).
If the ambient temperature drops below 24 degrees, the RWC switches off. If the temperature raises above 24 degrees, the RWC powers up.